Blocked stormwater drains
For drains that clear slowly, pits that overflow, water coming back through grates and pipe runs that appear blocked after rain.
Stormwater repair service Adelaide
Stormwater overflowing, blocked or backing up? Affordable Stormwater Adelaide repairs blocked pits, damaged pipes, poor drainage runs and water pooling around Adelaide properties.
Stormwater drains, pits, pipe repairs, downpipe drainage issues, driveway flooding and poor surface drainage.
A stormwater problem is not always one simple blockage. Water may back up because a pipe is crushed, a pit is full of silt, the fall is poor, roots have entered the line, or the system no longer suits the property.
For drains that clear slowly, pits that overflow, water coming back through grates and pipe runs that appear blocked after rain.
For cracked, crushed, leaking or collapsed sections of stormwater pipe that stop water moving away properly.
For pits that fill too quickly, hold silt, overflow near paving or push water back toward the house.
For water sitting on paths, yards, driveways, low courtyards and hard surfaces around the property.
For downpipes that discharge to the wrong area, overload a drain or send water too close to the building.
For older properties where original stormwater pipework may no longer suit new paving, extensions or changed site levels.
A repair should start with the cause, not just the symptom. If a pit keeps overflowing, clearing it once may not fix the problem.
The pipe run, fall, silt build up, outlet point and surrounding surfaces all matter. Water can show up in one place even when the fault is somewhere else in the system.
We look at what is visible on site, where the water starts, where it is backing up and what areas are being affected. That helps decide whether the job is a simple repair, a section replacement or a larger stormwater change.
Some stormwater issues can be repaired by clearing, reconnecting or replacing a damaged section. Others need a bigger fix because the same problem will keep returning.
A repair may be enough when the issue is isolated and the rest of the system still works. Replacement may make more sense when pipework is badly damaged, too shallow, poorly graded or no longer suitable for the property.
If a new run is the better option, we can explain what would need to change. You can also read about stormwater installation for replacement systems.
Stormwater problems often show up during or after heavy rain. The signs below can point to blocked drains, damaged pipes, poor fall or a system that needs attention.
These signs do not always mean the same repair is needed. The right fix depends on the site, pipe condition, water flow and where the system discharges.
Adelaide properties can have very different drainage setups. Older homes, paved courtyards, tight side paths, sloped driveways and low yard sections can all change how stormwater behaves.
Some renovated properties have new paved areas that send more water into the existing system. Some older homes have stormwater pipework that was never designed for the way the property is used now.
We repair stormwater issues with the property layout in mind. The aim is simple: help water move away from the areas where it causes problems.
We keep the repair process clear. You explain what is happening, we check the issue, then we talk through the repair options before work starts.
Tell us where the water is showing up and what happens when it rains.
We look at the visible drainage points, water movement and likely causes.
You get a clear explanation of the repair option and what it is intended to solve.
We carry out the agreed repair and leave the area tidy.
Repair is not always the final answer. If the existing setup is too damaged or poorly suited to the property, a new installation may be the better path.
For new drainage runs, pits, downpipe connections, driveway drainage and replacement systems.
View stormwater installation servicesNeed help choosing between repair and replacement? Call and explain what is happening at the property.
Contact Affordable Stormwater AdelaideClear answers for common repair questions.
Overflowing stormwater can be caused by silt, leaves, damaged pipes, tree roots, poor fall or a system that cannot move water away fast enough. The cause needs to be checked before the repair is chosen.
Damaged sections of stormwater pipe can often be repaired or replaced. The best option depends on the pipe location, depth, access and condition of the rest of the system.
Common causes include leaves, dirt, silt, roots, crushed pipework and debris entering pits or grates. Some blockages are also linked to poor pipe fall or old drainage layouts.
If the issue is isolated, a repair may be enough. If the system is badly damaged, poorly designed or no longer suitable for the property, a new stormwater installation may be a better long term option.
Poor drainage can allow water to sit near walls, paths, gardens or paved areas. The source should be checked so the repair deals with the cause, not just the visible pooling.
Affordable Stormwater Adelaide provides stormwater repair services across Adelaide and surrounding suburbs.
If your stormwater is blocked, overflowing or not draining properly, call Affordable Stormwater Adelaide. You can also send a quote request by email.
Photos can help show pooling water, overflowing pits, damaged drains or the area affected after rain.
For the fastest response, call the Adelaide team during business hours.
Email opens your mail app so you can send the job details and photos.